Today we repaired a built-in Kitchen Aid refrigerator. A customer contacted us and complained about their home appliance. The customer said that their fridge stopped cooling. As this could be dangerous when the weather is hot, we sent our experienced specialist as soon as possible. Our co-worker visited the client the same day. As usual, he made a quick diagnostic. The most important part of every refrigerator is the internal system. The technician started his search from this system because this system produces cold. Quickly he found that the compressor didn’t work.
Further search however showed the root cause of the issue. The malfunctioning inverter control board didn’t allow the compressor to work. Modern home appliances are full of electronics. The faulty part was successfully replaced in a timely manner. Now the refrigerator works as well as before.
Hot weather leads to hard-working refrigerating appliances. Even small damages become visible. A customer contacted us and explained that the Fresh Food Section in their built-in refrigerator Sub Zero didn’t provide appropriate cooling. Our team is always ready to help in difficult situations. We took the order and sent an experienced specialist to the customer. Upon arrival, he made a quick diagnostic. A faulty compressor, bad gasket, or dirty condenser coils could lead to the issue. The technician however found that there was a leakage in the evaporator of the Fresh Food Section. The bad device was accurately replaced. This is a usual job for our staff and it was completed in a timely manner. After replacement, the internal system of the Fresh Food Section was charged with new refrigerant. Now the refrigerator works well and doesn’t have any problems.
Repair and maintenance of commercial appliances is usual work for our team. A commercial client contacted us and said that in their stove Vulcan pilot didn’t work. As a result, the staff couldn’t use the stove, because not working pilot didn’t allow gas flow within the stove. As usual, we sent our experienced specialist to the customer. The technician visited the customer the same day. Upon arrival, he did a quick diagnostic. Several reasons could be responsible for the issue. One of the most common reasons could be a damaged temperature sensor or a blown thermal fuse. In rare cases, faulty wiring could also be the cause of the problem. Our repair man found that the safety valve and thermocouple were faulty. Both devices were replaced together. It is always best to call a professional to diagnose and repair the appliance.
Fridge SABA Repair in San Diego
Date: 06/27/2024
Brand: True
Service: Refrigerator Repair
Category: Refrigerators
Location: Pacific Beach San Diego County, CA, US
The weather becomes hotter and hotter. People need more cold. Refrigerating appliances work hard. A commercial client contacted us and explained that their reach-in freezer SABA didn’t produce enough cooling. As usual, we sent our experienced co-worker to the customer. The technician visited the customer the same day. Upon arrival, he completed a quick diagnostic. Many reasons could cause the issue. It could be challenging to determine the root cause of the problem. One of the main causes could be a failure of the evaporator fan motor or the defrost thermostat, leading to a buildup of ice. The experienced specialist found that the evaporator fan motor was not working. He replaced the faulty device accurately in a timely manner. This is a usual replacement for our technicians. Now the freezer works as well as before.
