The key to efficient operation of commercial freezer is regular service maintenance and on time high-quality repairs. The Big Joe Company performs professional repairs of any refrigeration equipment in San Diego with replacement of parts, repair of wiring, refrigerant recharging, adjustment or replacement of the compressor or evaporator, depending on the type of unit.
Fast refrigeration repair is required by customers for whom the constant operation of refrigerators and freezers is the key to a successful business. These are cafes, restaurants, bars, other catering businesses, super-, mini- and hypermarkets, grocery stores and food warehouses.
Big Joe specialists have sufficient qualifications and extensive experience in working with commercial freezer equipment of a wide variety of models. This allows us to guarantee our customers a 100% restoration of the performance of the refrigerator and freezer units.
Any of the above problems can occur both suddenly and be noticeable for a long time. Our experts advise not to delay the request for repairs, but immediately call Big Joe Repair. Timely handling will save equipment from more serious breakdowns, and our customers from more serious repair costs and expenses associated with appliance damage.
Date: 09/01/2022
Brand: True
Service: Commercial Freezer Repair
Category: Refrigerators
Location: Rancho Santa Fe San Diego County, CA, US
Today our technician repaired Commercial Freezer True. Our regular customers called us as freezer was not cooling enough and had temperature within 15-20 degrees. A Commercial Freezer True may not be cooling enough due to several reasons, including malfunctioning door gaskets, dirty or clogged condenser coils, or inadequate refrigerant levels. These problems can cause the temperature inside the unit to spike within 15-20 degrees from the target temperature, leading to spoilage of food items. Additionally, a faulty evaporator fan motor, malfunctioning temperature control thermostat, or a malfunction in the defrost timer can also cause a commercial freezer to not cool enough. Proper cleaning and maintenance, troubleshooting of the problem, and replacing damaged components can aid in restoring optimal functioning of the freezer. Technician could spot the issue right away. Condenser coils needed to be cleaned. We maintenanced the fridge and it started working properly again.
Date: 08/10/2022
Brand: True
Service: Commercial Freezer Repair
Category: Refrigerators
Location: Rancho Santa Fe San Diego County, CA, US
Today technician James was repairing Commercial Freezer True, that had an issue with high temperature and it was basically working as a fridge. A common reason why a Commercial Freezer True may have a high temperature is due to a malfunctioning evaporator coil. If the coil is dirty, it can restrict the flow of cool air into the unit, leading to inadequate cooling. Another possible reason could be a damaged door gasket or the use of a defective thermostat, causing warm air to enter the freezer. As a result, two evaporator fans needed to be replaced. Additionally, Technician did a maintenance and cleaning of condenser coils to prolong the lifetime of the appliance.
Date: 07/16/2022
Brand: True
Service: Commercial Freezer Repair
Category: Refrigerators
Location: San Diego, CA, US
Our technician repaired Commercial Freezer True. He replaced the temporary piercing valve that was left by another company to the permanent service valve, replaced two condenser fans, recharged it with the freon, so the Freezer works as a new one. Possible reason for a faulty condenser fan in a Freezer True unit could be a lack of power to the motor, which may be caused by a blown fuse or a tripped circuit breaker. Poor maintenance practices such as failing to clean the condenser coils regularly or allowing dust and debris to accumulate can also contribute to the failure of the Freezer True condenser fan.
Date: 07/14/2022
Brand: Walk-in
Service: Commercial Freezer Repair
Category: Refrigerators
Location: Ocean Beach San Diego County, CA, US
Our company repaired the walk-in freezer. Technician replaced insulation of the return line, dryer filter and freon level indicator. We also recharged it with the freon, so commercial space can operate smoothly again. A walk-in freezer may not hold the desired temperature if the evaporator coil is covered with ice build-up. This build-up hinders proper airflow, leading to an inefficient cooling effect. Leaks in the door gasket or the presence of cracks on the door will allow warm air to enter the freezer, and thus the freezer cannot maintain the desired temperature. Another potential cause of a walk-in freezer not holding its temperature is a malfunctioning compressor or a malfunctioning sensor, which will cause the system to work harder than necessary and as a result, draw more power and fail to maintain the desired temperature.